A clog is a build-up of waste material in your toilet. It’s caused by accidents, like a full bowl or overflow pipe, that prevent the water from draining properly. In that case, you can use a toilet plunger or call a plumber for assistance. Plunging a plunger can help dislodge any debris blocking its drain. But what are the signs you have a clogged toilet? And when to use a plunger or call a plumber? You can continue reading this article to learn more.
- When the toilet fills with water early in the flush cycle: If a toilet fills with water early in the flush cycle, you may have a slow-clogging bathroom. A clog in the pipe that feeds your cistern or tank can cause this problem by causing water to flow slowly and continuously into your toilet bowl. A clog can also cause slow-clogging toilets in the bowl itself. The common cause of this kind of blockage is hair build-up around the rim of an internal drain assembly (IDA). If this occurs, it’s essential to remove all types of debris from around IDA so that it can drain properly without getting stuck again when flushed down later on!
- When the water has a hard stream of water: If you have a high-clogging toilet, it could be a problem for you. High-clogging toilets are more common in older homes and can cause issues for people with arthritis or other mobility issues. They also tend to be larger than standard toilets, meaning there’s less room for waste to pool up before it exits through the drain valve. It can result in a powerful stream of water when flushed—and if this happens regularly (or even once), something needs fixing!
- When the water doesn’t drain from your toilet: If the water doesn’t drain from your toilet after flushing for ten minutes, it’s probably a clogged toilet or a clog somewhere along the line. Call a plumber if you can’t get rid of the clog with a plunger and some dish soap.
- When no water comes out: If you have a blocked toilet and no water comes out, put in a plunger. In addition, it must not continue to bubble. If it continues to bubble, then you need to call a plumber.
- When there is a gurgling sound and a foul smell: You may notice a foul smell and a gurgling sound coming from your toilet. It is often caused by an overflowing toilet or a clogged drain, but a malfunctioning water valve in the tank can also cause it. Suppose you have recently purchased a new home. In that case, chances are that you will be able to repair this problem yourself without having to call in professionals—but even if you need professional help, you can find a plumber at reasonable rates!
- When the toilet bowl overflows: If your toilet overflows, it’s best to leave it alone. The obvious solution is not always the best one. The first thing to check is whether any clogs in the pipes feed into your toilet bowl. These can be hard to see and often require some plumber’s help. Once they’re cleared out, if water still keeps running into your bowl when flushed, it’s likely an issue with how much water is being pumped out of its tank each time someone flushes their toilet. If this happens when no one has flushed since last night or this morning (and if there has been no other unusual activity), then you must contact an expert immediately so they can come over and fix whatever caused this problem before anything gets worse!
You can use a toilet plunger or call a plumber for assistance if you see any of the signs above. It will surely be fixed efficiently and swiftly, getting your toilet unblocked.
